How should I choose between the 0.2% and 0.5% accuracy versions of the LGF-PA66 electromagnetic flow meter?

The LGF-PA66 is produced in both ±0.2% and ±0.5% accuracy versions. The choice depends on what the flow data is used for — not on picking the highest number.

• ±0.5% version: for process monitoring, internal water balance in wastewater plants, industrial cooling-water assessment and most DMA district meters, where readings guide operations rather than invoices. Paired with an EC32 RTU uploading instantaneous flow and pressure for night-flow leakage analysis, it is fully sufficient — and saves a price tier.
• ±0.2% version: for custody transfer and billing (water sales between companies, heat-supply metering), quota-based assessment, and any point verified under JJG 1033, the Chinese verification regulation for electromagnetic flow meters. On large lines a 0.3% error translates into a substantial annual billing difference.

Two engineering details matter in practice. Rated accuracy holds within the 0.3–5 m/s velocity window — if the line runs persistently below 0.5 m/s, downsize the meter to raise velocity, otherwise neither version performs. The ±0.2% version is also less tolerant of installation disturbances: keep at least 10D straight pipe upstream and 5D downstream, away from pump-outlet turbulence. The integral PA66 body with built-in grounding electrode closes the signal loop inside the meter, which is what keeps the zero stable at high turndown.

Specify the accuracy grade at order time — the two versions differ in converter calibration and are not interchangeable in the field. For more details, please visit our product page or contact our technical team.