Straight pipe requirements comparison table for different flowmeter types - electromagnetic vs ultrasonic flowmeters
Flowmeter straight pipe requirements vary greatly: electromagnetic 5D/3D, ultrasonic 10-20D/5-10D, radar none, selection depends on measurement principle.
Straight pipe requirements vary significantly among flowmeter types due to different measurement principles. Here's a comprehensive comparison:
- Electromagnetic flowmeters (LGF series): Upstream 5D, downstream 3D, relatively tolerant to flow disturbances
- Ultrasonic flowmeters: Clamp-on type requires upstream 10D-20D, downstream 5D-10D, highly sensitive to flow profile
- Doppler radar flowmeters (HZ-KSLF): Non-contact measurement, no straight pipe limitations, ideal for open channels and irregular waterways
- Vortex flowmeters: Upstream 15D-20D, downstream 5D, sensitive to vibrations
- Orifice plate flowmeters: Upstream 10D-30D, downstream 5D-8D, most stringent requirements
Special condition adjustments: Add 5D after 90° elbows, 10D after control valves, 3D after reducers. Electromagnetic flowmeters offer significant advantages in complex piping systems due to their tolerance to flow disturbances. Proper straight pipe selection ensures measurement accuracy meets design specifications for industrial applications.
Installation & Commissioning
Related Questions
What are the full-scale calibration methods for Ecolor ultrasonic flowmeters and visual fusion radar level meters?
What are the specific zero calibration steps for Ecolor electromagnetic flowmeters and HZ-KSLF Doppler radar flowmeters?
What preparation work is required before commissioning Ecolor LGF electromagnetic flowmeters?
What professional tools are required for installing LGF electromagnetic flowmeters and ultrasonic flow meters?
How to set up alarms for ultrasonic flowmeters and RTU devices?