How is the Doppler radar flowmeter deployed in power plant circulating water and industrial open channels?

Typical industrial measurement points: circulating-water intake and return channels, WWTP outfalls, mining tailings return water, and steel-plant effluent channels. These sites share common traits — the medium carries solids or corrosive substances, the channels are usually existing concrete or earth structures, and production cannot stop for a retrofit.

Deployment advantages of the HZ-KSLF Doppler radar flowmeter in industrial channels:

• Non-contact measurement: the sensor sits above the channel with no wetted parts — wastewater, tailings slurry and corrosive media cause no fouling or corrosion.
• No process shutdown: no channel draining needed; installation and commissioning happen online.
• Level, velocity and discharge from one device, with the COSP model improving flow conversion accuracy for irregular cross-sections.
• Plant integration: Modbus RTU/TCP or 4G reporting straight into the plant SCADA/DCS; EC32 or EC60 RTUs enable remote monitoring of unmanned pump stations.

For pressurized measurement points (cooling-water supply lines, chemical transfer pipes), choose the LGF-PA66 aviation-grade electromagnetic flowmeter — PA66 composite body, corrosion-resistant and lightweight, IP68 rated for humid plant environments; where drilling into the pipe is not allowed, an external clamp-on ultrasonic flowmeter works. In mixed open-channel plus pipeline water systems, combining radar and electromagnetic meters covers the plant-wide water balance.

For more details, please visit our product pages or contact our technical team.