Which flow meter suits hydropower headrace and tailrace channels? Is radar a good fit?
Headrace and tailrace canals of hydropower stations are classic large open channels. Discharge accou
Headrace and tailrace canals of hydropower stations are classic large open channels. Discharge accounting directly affects generation efficiency and water dispatch, so selection depends on channel structure and duty conditions.
Preferred: Doppler radar flow meter. Headrace canals are typically 3–20 m wide with regular lining and calm water — ideal for the non-contact HZ-KSLF. The sensor mounts on a canal-side bracket or a bridge spanning the channel, intruding nothing into the flow, preserving conveyance capacity, and requiring no dewatering for maintenance. Tailrace velocity changes fast with unit load swings; radar responds within seconds and tracks these transients.
Penstock sections need an electromagnetic meter. If the metering point sits on a penstock or closed conduit, radar cannot be used — choose the LGF-PA66 aviation-grade electromagnetic flow meter instead: full-pipe accuracy ±0.5% (±0.2% optional), corrosion-resistant PA66 composite liner, IP68 rating for humid powerhouse environments, DN50–DN1200 covering typical station sizes.
Selection points:
- Open-channel sections: HZ-KSLF with parameterised cross-section setup; after current-meter rating, system accuracy reaches ±5%;
- Pressurised sections: LGF-PA66, sized by diameter and flow range, keeping velocity in the 1–5 m/s window;
- Telemetry: EC32 RTU with 4G/NB-IoT, feeding the station SCADA or water-dispatch platform;
- Power: AC220V inside the powerhouse; solar plus battery for remote canal sections.
In regions where headrace canals freeze in winter, the non-contact advantage grows: during ice cover the device never touches the water, unlike submersible sensors that ice can destroy.
如需了解更多,请访问我们的产品页面或联系技术团队。