Will a Doppler radar flow meter run reliably at high altitude, low temperature and strong UV?

Plateau and cold-climate service stresses flow instrumentation in three areas: cold-start capability

Plateau and cold-climate service stresses flow instrumentation in three areas: cold-start capability, material ageing and power supply. The HZ-KSLF is designed for all three and has run long-term in western China irrigation districts and flash-flood monitoring projects.

Operating temperature: the HZ-KSLF is rated -40°C to +70°C, covering winter conditions in the northeast, northwest and the Qinghai-Tibet Plateau. LCD response slows at low temperature — normal, and it does not affect measurement. Key circuits use wide-temperature components; cold start at -40°C needs no warm-up.

UV and materials: above 3000 m altitude UV irradiance is 2–3× the lowland level, and ordinary plastic housings chalk and crack. The HZ-KSLF radome and enclosure use UV-stabilised modified materials with IP68 sealing that survives years of sun and rain. Mounting the device on the shaded side of the bracket further extends enclosure life.

Cold-weather power: the real bottleneck is the battery — lead-acid capacity drops over 40% at -20°C. The recommended pairing is HZ-KSLF + EC32 low-power RTU: the EC32 supports sleep-and-collect duty cycles; size the solar panel for the worst monthly irradiance with a 1.5× margin, and use gel or low-temperature lithium batteries in an insulated box.

Radar measurement itself is barely affected by cold: non-contact means the sensor never touches the water. During freezing periods, as long as the beam footprint is not fully ice-sealed, flow measurement continues; under full ice cover a companion 80GHz radar level gauge keeps monitoring water level (cross-checked with a pressure sensor).

如需了解更多,请访问我们的产品页面或联系技术团队。

Technical Parameters